Lightforce LiFePO4 Batteries Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Lightforce LiFePO4 Batteries herunter. Lightforce LiFePO4 Batteries User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
The Lightforce Lithium Iron Phosphate Portable Power Pack comprises of a 7.5 amp hr zero
maintenance (sealed battery pack) including dedicated mains charger tted with a cigarette socket for
convenient direct connection to Lightforce lighting systems.
The battery requires no uid adjustments and will not leak if carried in any orientation.
This 12 volt battery can be used as a replacement battery for the standard SLA 7 – 9 amp hr as the
external dimensions are the same.
Built within this battery is an onboard battery monitoring system that monitors the individual cells then
calculates total remaining capacity via the onboard LED display.
Charging the Battery:
The 7.5 amp hr battery is transported with the terminals insulated. Before connecting to the Lightforce
battery bag, remove the insulation from the terminals and discard.
To fully recharge the battery pack, connect the specialised universal mains power supply directly into
the female cigarette socket located on the bag. The battery is supplied with a oat charge and will
require initial charging before use.
The AC mains chargers LED indicator will illuminate red indicating the charging process has
commenced, the battery pack is fully charged once the LED indicator turns solid green.
Disconnect the charger from the battery pack and the AC mains outlet once the charging process is
completed.
DO NOT leave the charger connected to the battery pack for extended periods, once the battery has
been charged.
Battery Protection:
Over charge protected
Over discharge protected
Over current protected 30 amps
Short circuit protection
Internal thermostat protection +65°C +/- 5°C
Battery voltage cut off 9.2 ~10 volts
Replaceable 30 amp mini blade automotive fuse
Precautions:
DO NOT disassemble the battery pack
DO NOT short circuit battery pack for extended periods
For optimal long term performance the battery pack should be recharged immediately after use
and stored in the UP-RIGHT position in a cool dry location
USE ONLY LiFePO4 (Lithium Iron Phosphate) battery chargers
LiFePO4 INSTRUCTIONS
LIGHTFORCE AUSTRALIA PTY LTD • 28 Orsmond Street, Hindmarsh SA 5007 Australia • www.lightforce.com | email: [email protected]
Australia: Tel: 08 8440 0888 | Fax: 08 8346 0504 • Int’l: Tel: +618 8440 0888 | Fax: +618 8346 0504
All logos and images are subject to relevant trademark and copyright protection LIGHTFORCE Pty Ltd | © Jan 2012 • Data and specications contained maybe subject to change without notice.
LIGHTFORCE AUSTRALIA Pty. Ltd., shall be not be liable for damage, malfunction, failure resulting from accident, misuse, misapplication, unauthorised repair, neglect, modication, unauthorised or non standard replacement parts, accessories,
globes, batteries or voltage or the operation of the Product beyond its technical and environmental specications.
INSTRUCTION DATA
PRODUCT: LiFePO4 Batteries
VER: 1.1
DATE: JUL 2013
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - INSTRUCTION DATA

The Lightforce Lithium Iron Phosphate Portable Power Pack comprises of a 7.5 amp hr zero maintenance (sealed battery pack) including dedicated mains c

Seite 2

LIGHTFORCE AUSTRALIA PTY LTD • 28 Orsmond Street, Hindmarsh SA 5007 Australia • www.lightforce.com | email: [email protected] Australia: Tel: 08

Kommentare zu diesen Handbüchern

Keine Kommentare