Lightforce SUPPORT-A-LIGHT Bedienungsanleitung PDF herunterladen

LIGHTFORCE AUSTRALIA PTY LTD • 28 Orsmond Street, Hindmarsh SA 5007 Australia • www.lightforce.com | email: [email protected]

Australia: Tel: 08 8440 0888 | Fax: 08 8346 0504 • Int’l: Tel: +618 8440 0888 | Fax: +618 8346 0504

All logos and images are subject to relevant trademark and copyright protection LIGHTFORCE Pty Ltd | © Oct 2006 • Data and speci cations contained maybe subject to change without notice.

LIGHTFORCE Australia Pty Ltd shall not be liable for damage, malfunction, failure resulting from accident, misuse, misapplication, unauthorised repair, neglect, modi cation, unauthorised or non standard replacement parts,

accessories, bulbs, batteries or voltage or operation of the product beyond its technical and or environmental speci cation.

INSTRUCTION DATA

PRODUCT: SUPPORT-A-LIGHT

VER: 2.0

DATE: MARCH 2008

SUPPORT-A-LIGHT INSTRUCTIONS

Support-a-light bracket consists of 8 components

as illustrated.

Tighten tri-screw (male) (1) securely through top plate

(2) to shaft (3).(do not over tighten).

There are 3 easy locating positions for the top plate on

shaft – facing front, centre or back of vehicle.

Secure top locating rail (5) through shaft (3) using

tri-screw (female) (4) - do not over tighten.

Recommended locating hole is second hole from top of

shaft.

Insert gas strut (7) into shaft (3) using strut locating

bolt & nut (6) – recommended locating hole is second

from bottom (adjust accordingly to size of window).

Attach locating bottom rail (8) to bottom of gas strut

(7).

If remote handle is too high or too low in window frame,

you are able to adjust the height simply by altering

the position of the top locating rail up or down in the

top three holes of shaft and adjusting gas strut to suit

accordingly.

PERFORMANCE LIGHTING

If interior trim is higher than exterior door frame:-

Place the bottom locating rail of bracket between glass and external

weather strip of door frame.

If exterior door frame is higher then interior trim:-

Place the bottom locating rail of bracket between glass and interior trim.

If both the interior trim and extrerior door frame (weather strip) are

level, place locating rail of bracket on either side of the glass.

Locating

rail of

bracket

Interior

door

trim

Retracted

Glass

Exterior

door

frame

Weather strip

CORRECTINCORRECT

Window Locating Instructions

PERFORMANCE LIGHTING 1

Inhaltsverzeichnis

Seite 1 - PERFORMANCE LIGHTING

LIGHTFORCE AUSTRALIA PTY LTD • 28 Orsmond Street, Hindmarsh SA 5007 Australia • www.lightforce.com | email: [email protected] Australia: Tel: 08

Kommentare zu diesen Handbüchern

Keine Kommentare

Lightforce SUPPORT-A-LIGHT Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Lightforce SUPPORT-A-LIGHT herunter. Lightforce SUPPORT-A-LIGHT User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lightforce SUPPORT-A-LIGHT